INNO Instrument

The most precise clad alignment splicer
on the market: View 3X

The View 3X from INNO Instrument is the most precise cladding alignment splicer (Active V-Groove) on the market and still scores with extremely fast splicing and heating cycles. This achieves a completely new level of comfort, safety and productivity.

On the high-resolution 5-inch color LCD touchscreen with intuitive, user-friendly interface, the operator benefits from the highest available resolution: 520 × magnification enables enormously detailed control.

A versatile fiber holder, the powerful rechargeable battery and adequate water, shock and dust protection round off a top-notch package.

View 3X Clad alignment splicer

A decisive added value of INNO splicers is the integration into the free View Pro Cloud Management System, which enables an entirely new. level of remote management. The web-based application enables onsite staff and back-office management to optimize workflows, generate comprehensive evaluations and much more.

  • Clad alignment (Active V-Groove)

  • High-speed splicing and heating

  • Highest magnification and resolution

  • Versatile fiber holder

  • 5-inch color LCD touch screen

  • Intuitive operation with smart GUI

View 3X: Water resistant, Shock resistant and Dust resistant
Download PDF now

Product sheet View 3X

Current product sheet “INNO Instrument View 3X splicer”
Download PDF now
View 3X: Device features overview
View 3X: Device features overview

You want to read it in peace?

If you want to read all the information about the View X splicer at your leisure…

Technical specifications

Model

View 3X

Number of fibers

Single

Alignment method

Active V-Groove clad alignment

Applicable fibers

SM (ITU-T G.652 & G.657) / MM (ITU-T G.651) / DS (ITU-T G.653) / NZDS (ITU-T G.655)

Coating diameter

100 μm to 3 mm

Cleave length

5 to 16 mm

Cladding diameter

80 to 150 μm

Splice programs

Maximal 128 modes

Heating programs

Maximal 32 modes

Splice time (typical) *

Quick mode: 4 seconds / SM mode 5 seconds

Heating time

Quick mode: 9 seconds / Average: 13 seconds

Protection sleeve length

20 to 60 mm

Display

5″ Color LCD display, Full Touch Screen

Fiber view

X, Y, XY, X/Y

Fiber display (magnification)

× 360 and × 520

Return loss

› 60 db

Data storage

Last 20,000 (values) or 10,000 (images) results

Pull test

1.96 to 2.25 N

Operation

Keys / Touchscreen

Lighting

White LED

Power supply

AC input 100 to 240 V / DC input 9 to 19 V

Battery *

Capacity: 5,200 mAh / Typical operation cycles: 300 cycles (splicing and heating)

Electrode life span

6,000 arc discharges

Data output

Cloud (View Pro Manager) and USB-C

Dimensions in mm (Height × Width × Depth)

151 × 149 × 177

Weight

2.19 kg

  • Splicing time: measured from the time of fibers entering the screen until the estimated loss is displayed. Splicing time can vary depending on calibration status.

  • Battery: Measured as a one-minute splicing and heating cycle. Measured in energy-saving mode.

  • Responsibility for damage resulting from misuse of the product is not accepted.

View Pro Manager

Another key added value of the View 3X is its integration with the free View Pro Cloud Management System, which offers a whole new level of remote management.

The highlights:

  • The real-time tracking function shows where the splicer is at any given time—forgetfulness and theft are finally a thing of the past. And pop-up messages provide quick information on the status of the device.

  • With device management, you can keep an eye on a warning about an electrode or a calibration to be performed, for example, at any times. And software updates can even be imported directly from the cloud.

  • All reports and data are exchanged online and are therefore immediately available, even if the device remains on a remote construction site. A physical readout via USB is still possible as an option.

  • Work / task management automatically archives the work progress of each device. Workforce planning has never been easier and efficiency gains are immediate.

View 3X with View Pro Manager

All functions are controlled or accessed from the dashboard on the PC or mobile phone connected to the INNO iCloud server. The View 3X in turn communicates with the server via a 4G / 5G cellular network. All it needs is a low-cost IoT SIM card and the splicer is on the web. And all the information is available as quickly as possible and always up to date.

Scope of delivery

  • Splicer View 3X

  • Cleaver V12

  • SOC Holder FH-SOC-R

  • SOC Heater cover HTS-SOC-02

  • AC Adapter JS-180300

  • Cooling tray CG-23

  • Electrodes E-70

  • Battery pack LBT-52

  • Power cable ACC-25

  • USB cable USB-7P

  • Carrying case ICC-55

  • Shoulder strap ST-01

Tools, consumables and accessories

In addition to the splicer, various tools are required to properly prepare the fibers. If you are not yet equipped here, we will of course be happy to help. Whether it’s the right stripper, loose tube cutter, cleaning fluid and cloths or a crimping press: you can get everything from us. And we are at your side with advice and action. Talk to us or get an initial overview online.

You need accessories?

If you are looking for high quality accessories to work better…

Are you convinced?

If you are convinced of the qualities of the View 3X and need more information…