INNO Instrument
Fast ribbon splicer
View 12R
View 12R, a ribbon splicer with a fully motorized clamp alignment system, is the most powerful and modern ribbon splicer on the market—and he meets all the requirements of the “ZTV-TK Netz” and is therefore suitable for all work in the Deutsche Telekom network.
Its advanced automatic clamp alignment system provides accurate and reliable splicing of ribbon fibers up to 12 fibers with double-tapping (zoom in & out) and scrolling to the world‘s highest magnification of 250 × for the ribbon splicer. The View 12R offers maximum working efficiency thanks to its splicing and rapid heating time, ultra-high battery capacity of 220 splicing / heating cycles and universal support for 250 μm and 900 μm single fiber.
The View 12R guarantees our valued customers a highly reliable work experience.
Product sheet View 12R
With thermal stripper
Long lasting thermal stripper specialized for ribbon fiber cable (1–12 cable). Fast working time (Heating: typical 5 sec).
Motorized clamp alignment system
View 12R‘s advanced clamp activates according to the position of the fiber so that each individual fiber core is correctly placed on its affected V-groove. There is no doubt that this process allows for accurate and reliable splicing.
Technical specifications
Model
View 12R
Number of fiber
1, 2, 4 ,6, 8, 10, 12
Splicing procedure
Core alignment
Applicable fibers
SM (ITU-T G.652 & G.657) / MM (ITU-T G.651) / DS (ITU-T G.653) / NZDS (ITU-T G.655)
Cleaved length
10–13 mm
Cladding diameter
125 μm
Splicing mode
Maximum 100 modes
Heating mode
Maximum 32 modes
Typical splice loss
SM: 0.05 dB / MM: 0.02 dB / DS: 0.08 dB / NZDS: 0.08 dB (ITU-T Standard)
Splicing time
Ribbon fiber: 15 seconds / Single fiber: 9 seconds
Heating time
Typical 20 seconds
Heating sleeve length
60 mm, 50 mm, 40 mm, Micro
Screen
90° bi-directional view, 5.0″ High resolution color display
Fiber view
X, Y, XY, X/Y
Magnification
250 × magnification
Return loss
› 60 dB
Results storage
The last 5,000 results (Values + photos)
Tention test
1.96–2.25 N
Operation
Button / Touch screen
Lighting
3 white LEDs
Power supply
AC Input 100–240 V, DC Input 9–14 V
Battery pack
9,000 mAh battery capacity / Typical 220 times (Splice + heat)
Electrode life
3,000 arcs, can be extended by using an electrode grinder
Terminal
UBS Type-C
Operating condition
Operating altitude: 0–3,660 m above sea level / 0–95 % relative humidity / −10 to 50 °C / Max. wind 15 m/s
Storage condition
0–95 % relative humidity / −40 to 80 °C
Dimensions in mm (Width × Depth × Height)
143 × 163 × 167
Weight
1.98 kg (without battery) / 2.64 kg (with battery)
Scope of delivery
Tools, consumables and accessories
In addition to the splicer, various tools are required to properly prepare the fibers. If you are not yet equipped here, we will of course be happy to help. Whether it’s the right stripper, loose tube cutter, cleaning fluid and cloths or a crimping press: you can get everything from us. And we are at your side with advice and action. Talk to us or get an initial overview online.